Shot peening is an important and, for safety reasons, essential process in many industrial sectors, primarily in the aerospace and automotive industries.
Peening technique dates back to Bronze Age armorers; although in more recent years, this technique has been used by engineers who worked the surface of a component with a « ball peen hammer » in order to induce internal compressive stress and thus increase service life.
Technological requirements in all industrial sectors, especially the aeronautic and aircraft industries, are becoming more and more extensive, particularly with regards to shot peening.
Check out IST’s Shot Peening System Guide which discusses major components used in shot peeners designed to meet the most stringent of technical requirements found in the Aerospace Industry.
Shot peening is a cold work process which consists of producing a compressive residual stress layer and modifying the mechanical properties of metals. In order to achieve this, it implies impacting a metallic surface with small spherical abrasive media (round metallic, glass, or ceramic particles) with force sufficient enough to create deformation.
Shot peening machines are not widely different than conventional abrasive blasting machines. The Peening process can occur in sandblast cabinets, abrasive blast rooms, and other traditional sandblast equipment.
Shot peening is a technique used in a broad range of manufacturing processes and applications. For instance, cast iron pans gain their enhanced mechanical and heat transfer properties from shot peening process.
In industries like aircraft, automotive, and railway manufacturing, shot peening is an inescapable process when it comes to forming components with enhanced mechanical strengths while yet using minimal amounts of material to reduce overall weight.
After all, we all know that the fuel or other energy source consumption of a vehicle is strongly correlated with its weight. The idea is similar to using steel rods as reinforcements for concrete in the construction industry – it allows the use of less material to achieve a given mechanical strength.
As mentioned previously, shot peening also enhances the mechanical strength of components and reduces the risk of failure when they are subjected to extreme conditions. For these reasons, drive components (i.e. gears) are often subjected to the shot peening process in order to induce compressive stress, which considerably increases their resistance to fatigue and reduces the risk of cracks during operating life while these components are subjected to multiple tensile and compression stresses.
SAE International (formerly known as the Society of Automotive Engineers) Standards is a US-based association that covers the engineering requirements for shot peening processes and techniques by the impingement of metallic shot, glass beads, or ceramic shot.
Standards prefixed by AMS (Aerospace Material Specification) refer to standards used in the aerospace industry. J relates to general standards which concern abrasive media or quality control methods of treated parts or process parameters used in a variety of general applications (including ground vehicles), while MIL (Military) relates to military equipment and weapons. In some cases, J-prefixed standards can also be used in the aerospace and military industries.
The typical peening processed standard used in a variety of applications covers the engineering requirements for peening surfaces of parts by the impingement of metallic shot, glass beads, or ceramic shot:
Shot peening processes could be automated to ensure consistent results:
The abrasive media type and size used in the process is also defined in aerospace standards:
The military standards define media and techniques for military vehicles and weapons:
These general standards apply to numerous peening applications, including aerospace and military:
All shot peening machines manufactured by IST are custom-designed to meet specific standards used in the manufacturing, military, and aerospace industries.
By definition, shot peening uses spherical-shaped abrasive media to produce the peening action – called shot. The shot material and size depend on the material composition of the workpiece and the desired result. The most common media used for shot peening are:
Refer to the IST Media Selection Guide in order to choose the right media for your application.
We use cookies to enhance your browsing experience, serve personalised ads or content, and analyse our traffic. By clicking “Accept All”, you consent to our use of cookies.